MITCHELL, SD – February 6, 2017 – (Motor Sports Newswire) – The Klock Werks Krew, in partnership with the industry-leading premium acoustic control brand Dynamat, introduce a custom audio accessory kit for Harley-Davidson models. Riders around the world love the iconic engine and exhaust sounds of their Harley Davidson motorcycles, but distracting fairing rattles and muddled stereo systems are a drag.

Read the whole article here Klock Werks and Dynamat Offer Up the Ultimate “Buzz-Kill”

 

HR-NETWORK-SROP600
We’d normally install insulation in a project car once all the paint is completed, but in an effort to keep stories coming we decided to paint the top half of the wagon thanks to Chopit Kustom, (714) 226-0860, and all the interior and the firewall, so we could install a headliner, glass, and start building up the interior and dash, as well as drop in the engine and trans. Before any interior trim or the headliner could go in, we covered all the sheetmetal that would be hidden under carpet or headliner with Dynamat. This is a lightweight elastomeric butyl and aluminum constrained-layer vibration damper, which serves to reduce road noise and “tin can” drumming that can occur with large, undampened metal panels. Read Full Article Here

Door Kit Cleaning (No Product) Web-200h

Step 1: Prep the Surface

Clean the mounting surface with a quick-drying, residue-free solvent. Remove all dirt, grease, oil, wax, moisture and rust to ensure a permanent bond between the Dynamat and the mounting surface.

Door Kit Cutting (Xtreme Pinwheel) Web-200h

Step 2: Size and Cut

Using a razor knife or scissors, cut the Dynamat sheet to the desired shape and size (you may find a cardboard or paper template helpful.) Remove the release liner from the back of the Dynamat and apply the Dynamat to the prepared surface. On large surfaces, remove the release liner in sections, working your way down and across the panel.

Door Kit Applying (Xtreme Pinwheel) Web-200h

Step 3: Apply the material

Apply the Dynamat to the mounting surface with a Dynamat roller tool. Take the roller tool and work the Dynamat into all contours of the metal panel. Using a razor knife, poke holes in any air pockets that may have formed between the panel and the Dynamat. Work the air out with the roller tool. Eliminating air pockets ensures lasting adhesion to the panel to give maximum damping effect.

Dynamat Mega Pack 1Dynamat Xtreme Mega Pak
Dynamat Xtreme quiets annoying road noise, improves a speaker’s dynamic range, and makes for a more comfortable driving experience. You can quiet down the noise, and get better sound.

The Dynamat Xtreme Mega Pak is the perfect for any large job. With the Mega Pak you get 9 of our largest sheets of Dynamat Xtreme to damp vibrations, quiet the noise, and get a more solid ride. Install with one of our Dynamat Rollers, and discover the Dynamat difference.

SKU: 10465
Contents: (9) 24″x 48″ (609mm x 1219mm) sheets of Dynamat Xtreme.
Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

Xtreme Bulk Pak Front Rendering (Shop)Dynamat Xtreme Bulk Pak
Dynamat Xtreme quiets annoying road noise, improves a speaker’s dynamic range, and makes for a more comfortable driving experience. You can quiet down the noise, and get better sound. The Dynamat Xtreme Bulk Pak is the perfect amount of Dynamat Xtreme for any medium to large sized job. With the Bulk Pak you get 9 sheets of 18″ x 32″ Dynamat Xtreme to damp vibrations, and get a more solid ride. Install with one of our Dynamat Rollers, and discover the Dynamat difference.
 
SKU: 10455
Contents: (9) 18″x 32″ (457mm x 812mm) pieces of Dynamat Xtreme
Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

Xtreme Hex Pak FrontDynamat Xtreme Hex Pak
The Hex Pak contains 4 square feet of Dynamat Xtreme. It is perfect if you need a little bit extra on-hand for your installation. The kit contains one 18″ x 32″ piece of self-adhesive Dynamat Xtreme for general use on rear decks, doors, floors and the trunk floors. Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

SKU: 10425
Contents: (1) 18″x 32″ (457mm x 812mm) pieces of Dynamat Xtreme. Total Coverage: 4.0 ft² (0.37 m²). Self- adhesive.

Xtreme Licese Plate No BackDynamat License Plate Kit
Noisy, vibrating license plates are embarrassing! If you are going to spend your hard-earned money on performance and audio gear, you don’t want your license plate rattling noisily to the beat.

The addition of the Dynamat Xtreme License Plate Kit makes your car sound as solid on the outside as it feels on the inside. It stops license plate rattles and noise. A new Dynamat license plate frame is included in the Dynamat Xtreme License Plate Kit. Now everyone knows You’ve got a better ride, better sound, and a better vehicle.

For best results when installing, be sure to use a Dynamat Roller, and hear the Dynamat difference.

SKU: 19100
Contents: (1) 4″ x 10″ (100mm x 254mm) piece of Dynamat Xtreme (Self-adhesive) (4) Neoprene Foam Strips (Self-adhesive) (1) Decorative License Plate Frame.

Xtreme Trunk Kit Angle Square No BackDynamat Xtreme Trunk Kit
Today’s powerful subwoofers cause a vehicle’s trunk to flex and vibrate, which creates bass distortion, a reduction in maximum bass output, and poor sound quality. Some people may find trunk rattles cool, but it is actually just bad bass. If you really want to impress, install the Dynamat Xtreme Trunk Kit and show how you can pump clean, clear, crisp bass without the rattle.

When it comes to playing loud bass in a vehicle, it is all about Sound Pressure Level (SPL). Low SPL results when your subwoofer causes vibration and movement of your vehicle’s body panels. Installing the Dynamat Xtreme Trunk Kit will convert that vibration and noise into silent energy, which results in higher SPL. Tests have shown that installing the Dynamat Xtreme Trunk Kit is like adding an extra amp. The Trunk Kit is not just for coupes and sedans. Use it to treat the back walls and side panels of trucks, and the rear cargo area of small hatchbacks and SUVs. With the Dynamat Xtreme Trunk Kit, you get the tightest, loudest bass your subwoofer can produce.

For best results when installing, be sure to use a Dynamat Roller, and hear the Dynamat difference.

SKU: 19405
Contents: (5) 18″x 32″ (457mm x 812mm) pieces of Dynamat Xtreme Total Coverage: 20 ft² (1.85 m²)


Dynamat, Inc. 3042 Symmes Road | Hamilton, OH 45015 USA | P: (513) 860-5094 | F: (513) 860-5095