Dynamat is synonymous with quiet, quality and comfort. Dynamat is a thin, flexible, easy-to-cut-and-mold material that stops noise-causing resonance and vibration. Dynamat's visco-elastic qualities promote vibro-acoustic energy conversion. In short, Dynamat turns noise into silent energy. You can apply Dynamat in patches (25-50% area coverage) to keep a specific panel from resonating or you can apply it over an entire area (such as the floor, doors or trunk of a car) to create a sound barrier and thermal insulator.

Dynamat is unique among thermal energy control materials. Other products are too thick, too expensive or too prone to attract and absorb water. Used alone, Dynamat makes an incredible difference. For even better results, add layers of Dynamic Control's TacMat or Dynaliner products. Dynamat combined with Extremeliner stops heat via a system using Random Path/Dissimilar Strata Heat Sink (RP/DSHS) technology. Such a system confuses the flow of energy and is highly effective without thick pads that keep your car's trim and upholstery from fitting properly.

Dynamat is most effective at eliminating mid- to high-frequency noise, by far the most irritating noises to humans (the squeaky wheel gets the grease for a reason). Removing these noises immediately gives you an improved audio environment. Your driving comfort increases--you'll even feel fresher after a long trip. After a day at work, a quiet comfortable drive home relaxes you from the stresses of the workplace. And, your car's stereo sounds better when your speakers are mounted on a panel that has Dynamat applied. In fact, you can now hear the quieter passages of music that your loud car was covering up.

After applying Dynamat alone to your car, you may hear some new sounds, sounds which were previously masked by the louder noises now removed by Dynamat. The noise may be from a part or device unaffected by your Dynamat application, or it may be noise at a frequency lower than can be effectively handled by Dynamat. For example, the boom you hear when you hit a freeway expansion joint is a low frequency noise that may be somewhat reduced by Dynamat, but can only be adequately attenuated by other methods. Adding Dynamic Control's Dynaliner or Extremeliner products, which are high-grade acoustic foams, reduces these low frequency noises.
<<back to top