Xtreme Basic Installation

Door Kit Cleaning (No Product) Web-200h

Step 1: Prep the Surface

Clean the mounting surface with a quick-drying, residue-free solvent. Remove all dirt, grease, oil, wax, moisture and rust to ensure a permanent bond between the Dynamat and the mounting surface.

Door Kit Cutting (Xtreme Pinwheel) Web-200h

Step 2: Size and Cut

Using a razor knife or scissors, cut the Dynamat sheet to the desired shape and size (you may find a cardboard or paper template helpful.) Remove the release liner from the back of the Dynamat and apply the Dynamat to the prepared surface. On large surfaces, remove the release liner in sections, working your way down and across the panel.

Door Kit Applying (Xtreme Pinwheel) Web-200h

Step 3: Apply the material

Apply the Dynamat to the mounting surface with a Dynamat roller tool. Take the roller tool and work the Dynamat into all contours of the metal panel. Using a razor knife, poke holes in any air pockets that may have formed between the panel and the Dynamat. Work the air out with the roller tool. Eliminating air pockets ensures lasting adhesion to the panel to give maximum damping effect.

Dynamic Control of North America, Inc. 3042 Symmes Road | Hamilton, OH 45015 USA | P: (513) 860-5094 | F: (513) 860-5095